ELG0420L1NCSC-5 Automation safety light curtain, resolution 25 mm, 4 beams, protective height 60 mm, output NPN
55 Items sold in last 12 months
2 People watching this product now!
ELG0420L1NCSC-5 is automation safety light curtain, featuring the following specifications:
- Beams (n): 4
- Beam space (mm): 20
- Protective height (mm): 60
- Total height (mm): 114
- Brackets: L1
- Ouput: NPN
- Sensing method: Normally close
- Color: Slive
- Scanning method: Cross Scanning
- Sensing distance: 0.5-5m
| Safety standard | Type 2 (IEC 61496-1/-2) Cat. 2, PL c (ISO 13849-1) SIL 1 (IEC 62061 IEC 61508) |
| Supply voltage | DC24V±20% |
| Capacity | <5W |
| Beam space | 10mm, 20mm, 40mm |
| Resolution | 15mm, 25mm, 45mm |
| Beams | 10mm beam space:8, 12, 16……14420mm beam space: 4, 6, 8……7240mm beam space:4, 6, 8……36 |
| Protective height | Protective height =（N-1）*beam space，N is beams |
| Wave length | 940nm |
| Response time | Response time =(N * 0.1ms) + 0.4ms, N is beams |
| Type of output（OSSD） | PNP or NPNLoad currents ≤500mA (Temperature exceed 40℃≤400 mA), residual voltages ≤1V (any voltage drop caused by cable extension is excepted), voltage leakage≤0.1mA |
| Protective circuit | Overload voltage protection, power supply reverse polarity protection, over current protection. |
| Sensing distance | 0.1~0.5m , 0.1~2m, 0.1~5m |
| Anti-optical interference | 10000Lux(I >5°) |
| Sensing method | Through-beam type |
| Synchronization | Wire synchronization |
| Enclosure material | Aluminum alloy |
| Color | Golden, Silver, Yellow |
| Enclosure rating | IP65 |
| Housing cross-section | 35*27mm |
| Ambient operating temperature | -10℃-55℃（with no freezing） |
| Storage temperature | -30℃-70℃（with no freezing） |
| Ambient operating humidity | When temperature is 20℃，humidity max 85% |
A1: Uppercover A2: Bottomcover + aviation cap B1: Upper stop-work range B2: Bottom stop-work range D: Beam gap H: Protective height L: Total height | A1=14mm; A2=20mm When D=10mm, B1=5mm; B2=25mm When D=20mm, B1=5mm; B2=35mm When D=40mm, B1=5mm; B2=35mm H is protective height:H=(beams-1) * beam space L is total height: L=A1+A2+B1+B2+H |
- L1 bracket
- L bracket (4pcs)
- Slider (4pcs)
- M6 gasket (4pcs)
- M6 spring washer (4pcs)
- M6*16 screw (4pcs)
- M6*8 screw (4pcs)
- L2 back of end cover bracket
- Up & bottom bracket (4pcs)
- M3*6 screw (8pcs)
- L7 side of end cover bracket
- Bracket 1(2pcs)
- Bracket 2 (2pcs)
- M3*6 screw (8pcs)
RELATED PRODUCTS